본 연구에서는 비재무정보인 기술사업성평가 정보와 더블 앙상블 기법을 활용하여 중소기업에 대한 부실예측모형을 구축하는 실험을 진행하였다. 여기에서 분석 데이터셋을 중소기업의 기술유형을 기준으로 일반형, 기술개발형, 임가공형으로 구분하고, 분석 데이터에 있는 건전기업과 부실기업의 샘플 비율을 동일하게 구성하기 위해 오버샘플링 기법인 SMOTE를 적용하여 데이터 균형화를 실시하였다. 더블 앙상블 기법에 적용할 기본 예측모형을 선별하기 위해 기계학습 알고리즘인 로지스틱 회귀, 의사결정나무, 베이지안넷, 인공신경망을 사용하였다. 그 결과 일반형과 임가공형에서는 베이지안넷 모형이 각각 84.65%와 76.98%의 가장 높은 적중률을 기록하였다. 기술개발형에서는 의사결정나무 모형이 73.27%의 가장 높은 적중률을 보여주었다. 이때 일반형에서는 10개, 기술개발형에서는 13개, 임가공형에서는 9개의 중요 변수를 발견하였다. 더블 앙상블 기법에 기술유형별 최고의 성능을 보인 예측모형을 활용할 경우 일반형과 임가공형에서는 적중률이 소폭 상승하였고 기술개발형에서는 다소 높은 적중률 상승 효과를 얻을 수 있었다. 본 연구를 통하여 기술사업성평가 정보만으로도 중소기업의 부실예측이 가능하고 중소기업의 기술유형별로 부실에 영향을 주는 중요변수가 서로 다른 것을 알 수 있었다. 또한 더블 앙상블 기법이 중소기업의 부실예측모형의 적중률 향상에 효과가 있음을 확인하였다.This study aims to build an insolvency prediction model for SMEs using the technological feasibility assessment information and double ensemble techniques. We divided the analysis dataset into general type, technology development type, and toll processing type based on the technology type of SMEs. In addition, we conducted the data balancing technique by applying SMOTE, an oversampling technique, to configure the same ratio of samples of health and insolvent companies for each analysis dataset. We used machine learning algorithms such as logistic regression, decision tree, Bayesian net, and artificial neural network to build the best prediction model for the double ensemble techniques. As a result, the Bayesian net model recorded the highest prediction rates of 84.65% and 76.98%, respectively, in the general and toll processing types. The decision tree model showed the highest prediction rate of 73.27% in the technology development type. We found ten important variables in the general type, thirteen variables in the technology development type, and nine variables in the toll processing type. In the case of applying the double ensemble techniques, we found that the prediction rate slightly increased in the general and toll processing types and obtained a relatively high prediction rate in the technology development type. The results showed that it is possible to predict the insolvency of SMEs only with technological feasibility assessment information, and important variables affecting insolvency were different for each technology type of SME. In addition, the double ensemble techniques effectively improved the prediction rate in the insolvency prediction model for SMEs.