표제지
요지
Abstract
목차
제1장 서론 13
1.1. 연구배경 13
1.2. 연구방법 및 범위 15
제2장 에폭시 바인더와 골재의 물성시험 17
2.1. 에폭시 바인더의 확보 17
2.2. 에폭시 바인더, 골재, 혼합물의 재료특성 시험 18
2.2.1. 에폭시 바인더의 점도와 작업시간 18
2.2.2. 에폭시 바인더의 열적합성 19
2.2.3. 골재의 비중, 흡수율, 입도 22
2.2.4. 에폭시 모르타르 혼합물의 압축강도 및 휨강도 23
제3장 에폭시 도포 골재 포설물의 미끄럼저항과 부착강도 26
3.1. 공시체 제작 26
3.2. 미끄럼저항 시험 27
3.3. 부착강도 시험 30
제4장 결론 39
참고문헌 41
Table 2-1. Commercially Available Product for Thin Polymer Overlays 17
Table 2-2. Uncured Properties of Epoxy Binders for Epoxy Thin Overlays 19
Table 2-3. Surface Conditions of Specimens by CSP after Shot Blast 20
Table 2-4. Thermal Compatibility Result of RH 60% Specimen 22
Table 2-5. Results of Aggregate Tests for Epoxy Thin Overlay 23
Figure 1-1. Spreading Polymer on Johnson County Bridge Deck 14
Figure 1-2. Epoxy Polymer Overlay for Bridge Deck Pavement 16
Figure 2-1. Epoxy Binder Test 19
Figure 2-2. Thermal Compatibility Test 21
Figure 2-3. Aggregate Test 22
Figure 2-4. Compressive Strength and Flexural Strength Tests for Epoxy Binder 24
Figure 2-5. Physical Properties of Epoxy binders for Epoxy Thin Overlays 25
Figure 3-1. Epoxy Thin Overlay Specimens 27
Figure 3-2. Dressing Wheel Abrasion Test 28
Figure 3-3. British Pendulum Test 28
Figure 3-4. Skid Resistance of Pavement Surface by Construction Phase 29
Figure 3-5. Specimen Surface and Core Sample after Pull-Out Test 30
Figure 3-6. Bond Strength of RH 40% Specimens 31
Figure 3-7. Bond Strength of RH 60% Specimens 32
Figure 3-8. Bond Strength of RH 80% Specimens 33
Figure 3-9. Bond Strength between LMC and Epoxy Thin Overlay 35
Figure 3-10. Percentage by Failure Location According to RH of LMC Surface 37