본 연구에서는 경사제 항내측 사면에 거치된 피복재의 안정성에 대한 단면수리실험을 수행하였으며, 항내측 피복재로는 피복석을 적용하였다. 국내 항만 및 어항설계기준에서는 항내측 피복재의 중량산정 방법으로 상치콘크리트가 설치되지 않은 조건에 대하여 항내측 일부구간을 항외측 피복재와 동일 중량비의 피복재를 사용하도록 설계 도표로 제시하고 있다. 국내에 설계되는 대부분의 경사식 구조물은 상치콘크리트가 설치되어 있으며, 이에 대한안정중량 산정 방법이 필요하다. 피해율 S = 2를 기준으로 안정파고를 산정하여 안정성을 검토하였으며, 소요중량은상대여유고에 대한 항외측 피복재(테트라포드) 대비 항내측 피복석의 중량비로 제시하였다.
In this study, hydraulic model tests were performed to investigate the stability of armor units at harbor side slope for rubble mound structures. The armor units on the rear slope were rocks. The Korean design standard for harbor and fishery port suggested the design figures that showed the ratio of the armor weight for each location of rubble mound structures and it could be known that the same weight ratio was needed to the sea side and rear side slope of rubble mound structures. The crest elements were commonly applied to the design process of rubble mound structures in Korea and the investigation of the effects of super structures would be needed. The damage rate (S =2 ) was applied and the stable wave height was measured for each test condition. The results were suggested as the armor weight ratio of the rear side slope(armor rock) to the sea side slope (tetrapod) in relation to the relative crest height.