점자안내판은 시각장애인의 공간인지와 보행을 위한 보조수단으로 공공시설이나 중요 건축물 입구에 의무적으로 설치되어 있다. 점자안내판과 같이 고정형의 촉지도는 이동이 불가능하고 1층에만 설치되는 단점이 있으며, 설치에 있어 많은 비용과 시간이 소요된다. 특히 대부분 철재로 제작되어 촉지도에 담을 정보 변경시 추가적인 비용이 발생한다. 특히 규격과 높이에 대한 규정으로 인하여 키가 낮은 저학년이 사용하는데 어려움이 많다. 본 연구에서는 휴대형 실내 촉지도를 고정형 촉지도와 함께 추가로 비치하여 이와 같은 문제점을 보완하고자 하였다. 이를 위해 본 연구에서는 휴대형 촉지도의 국내외 제작사례를 조사 및 분석하고 3D 프린터, 열전사 프린터, 점자 프린터 장비를 이용하여 실내를 대상으로 한 휴대형 촉지도를 제작하였다. 그리고 제작된 휴대형 촉지도는 전문가와 시각장애인을 대상으로 사용성 평가를 수행하여 개선사항을 도출하였다. 사용성 평가결과는 3D 프린터로 제작된 촉지도를 가장 선호했으며, 다음으로 열전사 프린터, 점자 프린터 순으로 나타났다.
Braille signs are compulsorily installed at the entrance of public facilities and important buildings as an aid for the visually impaired to recognize and navigate the space. Fixed tactile maps, such as Braille signs, have the disadvantage that they cannot be moved and can only be installed on the first floor, and they are costly and time-consuming to install. In particular, most of them are made of steel, and additional costs are incurred when changing the information on the tactile map. In particular, there are many difficulties in using them due to regulations on the size and height. In this study, we aimed to compensate for these problems by providing portable indoor tactile maps along with fixed tactile maps. To this end, this study investigated and analyzed domestic and foreign production cases of portable tactile maps, and produced portable tactile maps for indoor use using 3D printers, thermal transfer printers, and braille printers. The produced portable tactile maps were evaluated for usability by experts and visually impaired people to derive improvements. The results of the usability evaluation showed that tactile maps produced by 3D printers were the most preferred, followed by thermal printers and braille printers.