표제지
목차
요약 9
Abstract 10
제1장 서론 12
1.1. 연구배경 및 목적 12
1.2. 이론적 배경 15
1.2.1. 골 지지체의 종류와 필수 조건 15
1.2.2. 플라스틱의 열처리 20
제2장 실험 방법 22
2.1. PLA-HAp 복합체 및 필라멘트 22
2.1.1. PLA-HAp 복합체 및 필라멘트의 제조 22
2.1.2. PLA-HAp 필라멘트 평가 방법 23
2.2. 복합체 스캐폴드 24
2.2.1. 복합체 스캐폴드 제작 24
2.2.2. 복합체 스캐폴드 열 특성 평가 및 열처리 온도 설정 26
2.3. 열처리 한 복합체 스캐폴드의 평가 27
2.3.1. X-선 회절 27
2.3.2. 미세구조 27
2.3.3. 열 특성 28
2.3.4. 기계적 특성 28
2.3.5. 생체적 특성 29
제3장 결과 31
3.1. PLA-HAp 필라멘트 특성 31
3.2. 열처리 한 3D 복합체 스캐폴드 34
3.2.1. X-선 회절 34
3.2.2. 미세구조 36
3.2.3. 열 특성 39
3.2.4. 기계적 특성 41
3.2.5. 생체적 특성 44
제4장 결론 49
참고문헌 51
Table 1. Types and Pros and Cons of Materials Used in Bone Regeneration 16
Table 2. Output Conditions of FDM 3D Printing 24
Table 3. Changes in Crystalline of PLA-HAp Scaffold with Heat Treatment... 35
Table 4. Changes in Size and Shrinkage Rate of PLA-HAp Scaffold Pore... 38
Figure 1. Conceptual Diagram of Bone Tissue Engineering 17
Figure 2. (A) Amorphous structure, (B) Structure of Semi-crystalline Polymer 21
Figure 3. (A) Photo of Filament Extruder for FDM 3D Printer,... 22
Figure 4. (A) 3D Model of Scaffold,... 25
Figure 5. DSC curve of PLA-HAp Filament 26
Figure 6. (A) XRD Patterns of PLA-HAp Filment and HAp nanopowder,... 32
Figure 7. (A)-(A') SEM and EDS mapping image of PLA-HAp Filament,... 33
Figure 8. Change of XRD Patterns according to PLA-HAp scaffold Heat... 35
Figure 9. SEM images of 3D Scaffold surfacessss 37
Figure 10. (A) DSC curves of PLA-HAp scaffold 1st Heating,... 40
Figure 11. Compressive Stress-Strain Diagrams of Heat Treatment Conditions... 42
Figure 12. Compressive Modulus and Compressive Yield Strength According to... 43
Figure 13. (A) SEM image of scaffold surface without Saos-2 cells,... 45
Figure 14. Live (Green) and Dead (Red) images of... 46
Figure 15. Cell Number Change by Cell Proliferation in PLA and Heat... 47
Figure 16. Changes in ARS O.D Values According to Cell Function in PLA and... 48